What do you do when a pipe bursts in your home or property? Find the stopcock and shut it off immediately to prevent flooding. However, If you don’t know where your stopcock is, you’ve got a problem! This article will tell you all you need to know about your stopcock, where to find it, and how to act fast to shut it off if a leak or burst pipe should occur.
What is a stopcock?
Despite the stopcock being the main water valve in every UK home, almost seven million UK citizens have no idea what a main stopcock valve is. What’s more, a quarter of us has never even tried to find our stopcock according to research by Direct Line.
A stopcock, sometimes called a stop tap, controls the entire supply of mains-fed water in your home. The tap is always on, allowing water to enter as and when you need it. But the stopcock lets you shut off the supply in an emergency, such as a burst pipe, or to carry out plumbing work.
Whether your stopcock is open or closed determines whether water enters the pipes of your home, serving crucial appliances like:
- your hot water cylinder
- cold water tank and/or boiler
- the taps in your kitchen and bathroom(s) and your shower
- any other appliances that use water to function, such as your washing machine and dishwasher
In short, when your stopcock is shut off, your state-of-the-art, modern domestic lifestyle grinds to a halt.
Why is it important to know where your stopcock is?
It’s crucial to know where your stopcock is because it’s the control tap or isolation valve for your mains water supply. It’s also often called a ‘stop tap’.
This means it’s the first place you should go in the unlucky event of a pipe bursting or a leaking tap. Shutting it off can prevent a minor problem from becoming a major one that might create a flood, causing hundreds or even thousands of pounds worth of damage to your home.
Did you know that most homes have an external and internal stopcock?
Your external stopcock is the tap located outside your home that lets the water supply serving your street into your home. Your internal stopcock controls the flow of water inside your home.
Some homes don’t have external stopcocks, only internal ones. In any case, in the event of a flood in your home, your first priority should always be to switch off your internal stopcock.
It’s also wise to find out if you have an external stopcock so that if your leak or flood is caused by your external supply pipe leaking or rupturing, after shutting off your internal stopcock you can shut off your external stopcock one too, to stop the water flooding your home and allow for repairs.
Where is my stopcock?
Your property normally has two stopcocks. You’ll find the internal stopcock inside your home, as close as practicable to the point where the cold water supply enters your property, usually under the kitchen sink or in a downstairs WC or bathroom.
Your external stopcock is outside, on the boundary of your property, and it’s the responsibility of your water supplier to fix it if there’s a leak.
Do you have a leaking stopcock?
If you discover a leaking stopcock tap, it’s essential to tackle it immediately, so it doesn’t get worse.
A stopcock is made up of three main parts:
- Compression nuts
Two compression nuts join the tap to the water pipes on either side.
- Gland nut
This sits directly below the tap and prevents water from flowing up inside the spindle.
- Head gear joint
This is the main body of the tap, between the compression nuts, and is the mechanism inside the stopcock which stops the flow of water.
Which part is leaking?
If you can actually see water leaking out of your stopcock, it’s an issue with either the compression nuts or the gland nut. If you can’t actually see any water leaking, but when your stopcock is turned off you still have water flowing from your taps, you’ve got an issue with the head gear joint.
How to fix a leaking stopcock
Go straight to our dedicated article on How to fix a leaking stopcock for step-by-step instructions on how to fix all three parts of your stopcock. You may need to replace small components or have some plumbers’ PFTE tape handy. – all is explained in the article.
Contact HomeServe if you need help
We’re on our way, with teams of expert plumbers and Gas Safe registered engineers on hand to make one-off repairs and fixes.
We also provide plumbing and drainage cover for all the pipes in your home (or property if you’re a landlord), including your stopcock, drains, toilets and tanks – so you can be confident that if anything goes awry with your plumbing and drainage, the disruption will be minimal.
FAQs
Where will I find my mains water shut-off valve?
Your internal stopcock or stop tap is usually located under your kitchen sink or in a downstairs bathroom.
Where is my external stopcock?
Your external stopcock (if you have one) is often located near the boundary of your home under a small square cover. If your property has a water meter, the external stopcock will probably be housed with it.
